These prefabricated pools are comprised of a modular structure with 2 mm thick sheet metal panels hot-galvanised using the SENDZIMIR process on both faces.

The panels are bolted to each other with an elastic covering, supported by buttresses and bound to the base slab. This creates a solid, robust structure.

The modular structure allows the creation of any shape, with the ability to customise the pool.

POOL'S structures are compliant with "NTC 2008" seismic shock resistance.

In all cases, a DESIGN is required. This must be produced by an engineer with suitable qualifications in the construction of prefabricated structures.

The panels are available in heights of 700, 1065, 1200, 1350 and 1500 millimetres.

The height of the overflow channel must also be considered; according to the type installed, this may be either 4 cm. or 7 cm., which must be added to the panel height.

The prefabricated overflow channel may be partial or full-perimeter. It is also coated with a PVC liner and can be combined with plastic grilles, crushed marble, travertine, etc.

If a diving board is added to the installation, it is possible even with panels of 1500 mm height to reach a maximum water depth of 2300 mm.

Prefabricated structures offer many advantages:

• Speed ​​of construction
• Less construction work required, reducing costs
• Accurate and reliable
• Lighter structures compared to concrete
• Possibility of installation above ground, or either partially or totally below ground

But also some disadvantages...

• Possibility of lining solely with PVC, without tiles