These prefabricated pools are comprised of a modular structure with 2 mm thick sheet metal panels hot-galvanised using the SENDZIMIR process on both faces.

The panels are bolted to each other with an elastic covering, supported by buttresses and bound to the base slab. This creates a solid, robust structure.

The modular structure allows the creation of any shape, with the ability to customise the pool.

In all cases, a DESIGN is required. This must be produced by an engineer with suitable qualifications in the construction of prefabricated structures.

POOL'S structures are compliant with "NTC 2008" seismic shock resistance.

The panels are available in heights of 700, 1065, 1200, 1350 and 1500 millimetres.

If a diving board is added to the installation, it is possible even with panels of 1500 mm height to reach a maximum water depth of 2300 mm.

Prefabricated structures offer many advantages:

• Speed ​​of construction
• Less construction work required, reducing costs
• Accurate and reliable
• Lighter structures compared to concrete
• Possibility of installation above ground, or either partially or totally below ground

But also some disadvantages...

• Possibility of lining solely with PVC, without tiles

There are two types of skimmer design:

Classic, with 46 x 25 cm mouth
Skimmer overflow with 80 x 18 cm mouth

The second design is by far the most visually aesthetically pleasing design and allows a reduced gap between the water surface and the pool edge.