There are numerous types of coverings for swimming pools, classified according to use:

• Winter Covers
• Isothermal Covers
• Safety Covers
• Telescopic Covers

WINTER COVERS
These can be made of high density polyethylene or PVC – stronger, but heavier.
They are fastened with hooks, perimeter laces or water-filled tubes. They are not safety covers, so it is recommended to fence off the pool – temporarily if necessary – for the winter.

SAFETY COVERS
Our company can install two types: AQUA TOP & AQUAGUARD

The AquaTop shutter can be adapted to existing pools and those under construction. Thanks to the versatility of their many solutions, AquaTop can combine comfort, aesthetics, and any budgetary requirement. The AquaTop slats comply with the French NF P90-308 standard – a guarantee of quality and safety. Thanks to its automatic end-stop system, this cover ensures peace and tranquility even in the presence of children. The automatic cover is operated via remote control or electrical switch.

Energy savings
The main function of a shutter is to maintain the heat within the pool, reducing its loss. The AquaTop shutters are especially effective, being composed of three watertight compartments filled with air, which provide excellent thermal insulation.

Increased safety
The AquaTop slats can bear the weight of an adult of over 100 kg, ensuring a high level of safety. The slats comprise 5kg / m² of material, which guarantees their excellent durability and greater strength for enhanced safety. This guarantee of quality allows greater resistance to UV rays, hail, chemicals, dirt, etc.

Solution with submerged system
This is the most discrete solution, making the environment of your pool more uniform and aesthetically pleasing. The assembly can be done through a niche, either next to the pool or on the pool bottom. This houses the automatic cover with a motor either inside the cover drive-shaft, or external to it. This design can be opened and closed via an electrical signal, while the automatic end-stop ensures the system's effectiveness and precision. There are several mounting possibilities with this solution.
Option with above-ground shutter
This is the ideal solution for creating a thermal cover over an existing pool. These models can have an exotic wood and stainless steel, or PVC and aluminium covering. A perfect, precision finish that can enhance any environment. Suitable for pools with a maximum width of 10.00 m.
It is also possible to integrate this cover with the EcoTop system that allows operation using solar energy.

The AquaGuard cover, as well as performing the dual function of summer and winter cover, also provides safe protection for children and animals. The AquaGuard cover is PVC reinforced on both sides with polyester tape. The fabric is not taut but rests in the water, anchored to the aluminium rails.
It ensures durability and safety, supporting the weight of several people.
The cover impedes evaporation; heat loss is reduced to a minimum, the pool is kept clean, dirt and debris can not fall into the pool and are easily removed. Every drop of rainwater is eliminated through a fastner positioned on the cover, while an (optional) immersion pump allows you to eliminate any excess water deposited on the cover
The AquaGuard covers can be used in both summer and winter.

TELESCOPIC COVERS
This is a garden furnishing component: precarious, mobile and telescopic, it is extended to cover the pool when it is not possible to benefit from it in the open air, and is also intended to provide safety and protect the water's surface from atmospheric agents.

• The T-Cover cover increases the temperature of both the water and the air within the cover, exploiting the natural greenhouse effect created, maintaining the heat stored during the day and thus avoiding natural heat loss.
• A telescopic structure, without permanent anchoring to the ground, it consists of uprights and crosspieces made from aluminium coated in epoxy resins. It supports manual or motorised opening, with no sliding guides on the ground, and can be mounted or leaned against the main building. The waterproof rolling wheels and non-deformable Teflon brushes are mounted on stainless steel; square profiled members with stainless steel bolts.
• The supporting structure and crossbar runners are made with patented "P100" profiles, produced using extruded structural aluminium alloy. The top of the cover is made of multi-cell transparent polycarbonate panels of 6 mm thickness.
• The side walls can be made using transparent Veralite panels in of 6 mm thickness, fire-retardant class M1, or using VISARM 6-7 mm. glass. The whole structure interior is sealed internally using silicone, and externally like a fitted window.
• Sliding is performed by means of wheels with a self-supporting and self-routing system, with an internal stainless steel trolley, self-lubricating Teflon or Arnite wheels and bearings, and a shoe that ensures perfect rectilinear movement.
• The complete transparency of the panels, and the option of supports coloured with epoxy paint from a wide range of different (RAL) shades, make the structure pleasant and minimise its environmental impact. You can also insert sliding doors or windows for air circulation.
• Once closed, whether manually or by means of suitable engines, the structure will only cover an area given by the width of the structure itself to the depth of a component, with the addition of the depth given by the thickness of the uprights of the other components. So the key features of the cover are its versatility, practicality, robustness, elegance and pool safety.